
Technical data
The HESCH multifunction controller is designed for universal installation in 1/4 DIN format. Via the 3.5″ touch screen and the four freely programmable keys, the usage is very user-friendly. The basic device offers slots for two I/O cards and a communication card, which can be selected individually depending on the application.
I/O cards
I/O card type 1:
- two galvanically separated analogue universal inputs (for measuring temperatures, voltages, currents, resistances, norm signals, etc.)
- two galvanically separated standard signal inputs (current/voltage)
- two galvanically separated analogue outputs (current/voltage)
- six digital inputs/outputs (user-programmable as input or output)
Further I/O cards on request.
Communication cards:
The HESCH multifunction controller offers the following communication cards:
- Profinet
- Profibus
- Modbus RTU Master
- Modbus RTU Slave
- Modbus TCP Client
- Modbus TCP Server
- CAN Bus
- HPR Bus Master
Further communication profiles on request.
Relay outputs:
The HESCH multifunction controller offers four potential-free relay outputs with change-over contacts.
Further technical data:
Supply voltage
100…240 VAC / 24 VDC
Sensor supply
18 VDC / 45 mA
Power consumption
Max. 350 mA (24 VDC)
Display
Resistive touch screen; 3,5″
Resolution: 320 × 240 pixel QVGA
USB interfaces
Back: 1 × USB 2.0 Host (type A)
Front: 1 × Mini USB 2.0 device (type B), galvanically separated
LEDs
2 freely programmable LEDs as state indicators
Keys
4 freely programmable keys
CPU
Cortex A8, 600 MHz
Boot time
approx. 17 seconds
Real time clock
buffered against mains failure
Memory
eMMC 4 GByte
DDR2 65 MByte
Flash 128 MByte
MRAM 128 KByte
Housing
Control panel built-in casing
Protection class IP 65 at the front/IP 20 remaining areas
Dimensions: 98 × 98 × 115 mm (without plug)
Climatic ambient conditions
Storage/Transport: -20° C … +70° C
Operation: 0° C … +55° C